1. IR @ Alliance University
  2. Faculty Publications
  3. Journal Articles
Please use this identifier to cite or link to this item: https://gnanaganga.inflibnet.ac.in:8443/jspui/handle/123456789/2147
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAin, W Q-
dc.contributor.authorFaisal, M K-
dc.contributor.authorTalari, M K-
dc.contributor.authorDarham, W-
dc.contributor.authorRatnam, M M-
dc.contributor.authorKwon, Y-
dc.contributor.authorKim, N J-
dc.contributor.authorPrasada Rao, A K-
dc.date.accessioned2023-12-04T05:26:33Z-
dc.date.available2023-12-04T05:26:33Z-
dc.date.issued2016-08-05-
dc.identifier.citationVol. 25, No. 10; pp. 4310-4316-
dc.identifier.issn1059-9495-
dc.identifier.urihttps://doi.org/10.1007/s11665-016-2266-2-
dc.identifier.urihttp://gnanaganga.inflibnet.ac.in:8080/jspui/handle/123456789/2147-
dc.description.abstractReported work focuses on the effect of morphology of the Fe-rich intermetallic phases on the machinability of Al-alloy containing >2wt.% Fe, obtained from automotive scrap. Effect of Mo addition on the microstructure, high-temperature impression creep and thereby the machinability of the Al-recycled alloy were studied. The machinability of the recycled alloy was estimated by investigating the built-up-edge (BUE) and surface roughness (Ra). SEM-EDS and TEM-SADP studies have shown that the crystal structure (BCC) of the Al8Fe2Si phase remained unchanged; however, Mo replaced few Fe atoms with little effect on the lattice dimension. It has been found that the addition of Mo to the recycled alloy suppresses the formation of ?-phase (Al5FeSi) by suppressing the peritectic transformation of ? (Al8Fe2Si) phase. Such suppression is found to improve the high-temperature creep resistance and the machinability with the increase in the Mo addition level. © 2016, ASM International.-
dc.language.isoenglish-
dc.publisherJournal of Materials Engineering and Performance-
dc.subjectAluminum-
dc.subjectCasting and solidification-
dc.subjectElectron-
dc.subjectIntermetallic-
dc.subjectMachining-
dc.subjectMicroscopy-
dc.subjectOptical metallography-
dc.subjectRecycling-
dc.titleEffect of Mo on The High-Temperature Creep Resistance and Machinability of A Recycled Al-Alloy With High Iron Impurity-
dc.typeArticle-
Appears in Collections:Journal Articles

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.