1. IR @ Alliance University
  2. Faculty Publications
  3. Conference Papers
Please use this identifier to cite or link to this item: https://gnanaganga.inflibnet.ac.in:8443/jspui/handle/123456789/2239
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSuresh, R-
dc.contributor.authorReddy, K Sohit-
dc.contributor.authorShapur, Karthik-
dc.date.accessioned2023-12-09T08:56:02Z-
dc.date.available2023-12-09T08:56:02Z-
dc.date.issued2018-
dc.identifier.citationVol. 5, No. 2, Part 1; pp. 5757-5761en_US
dc.identifier.issn2214-7853-
dc.identifier.urihttps://doi.org/10.1016/j.matpr.2017.12.171-
dc.identifier.urihttp://gnanaganga.inflibnet.ac.in:8080/jspui/handle/123456789/2239-
dc.description.abstractIn the present research work, effects of process parameters on the machine characteristics of GFRP composite and Borosilicate glass have been carried out. The drilling characteristics that have been investigated are material removal rate (MRR) and taper angle of the hole. The four process parameters were considered for the study-stand of distance, pressure, abrasive particle size and time taken. The significant parameters were identified and their effect on the MRR and taper angle were studied. The obtained results reveal that MRR is most influenced by the abrasive particle size and stand of distance. © 2017 Elsevier Ltd.en_US
dc.language.isoenen_US
dc.publisherMaterials Today: Proceedingsen_US
dc.subjectAbrasive jet machiningen_US
dc.subjectGFRP compositesen_US
dc.subjectMicro-hole drillingen_US
dc.titleAbrasive Jet Machining For Micro-Hole Drilling on Glass and Gfrp Compositesen_US
dc.typeArticleen_US
Appears in Collections:Conference Papers

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.