Deposition of Bronze-Nickel on Steel By Laser-Based Metal Deposition Process

Abstract

Direct Metal Deposition (DMD) is an additive manufacturing process for fabrication of metal parts directly from CAD model using high power lasers as heat source. In this paper, bronze nickel material was deposited on steel substrate by DMD process. Laser power was varied from 100 to 300 W in steps of 50. Laser scan speed, powder flow rate, nozzle stand-off and step-over were maintained at 165 mm/min, 1.2 g/min, 10 mm and 0.15 mm respectively. Laser power had a significant influence on the quality of joint between bronze nickel and steel.